| Application |
| Measuring element | ceramic-capacitive pressure measuring | cell |
| Application | for industrial applications |
| Media | | liquids and gases |
| Conditionally suitable for | | For gaseous media the application is limited to max. 25 bar. |
| Medium temperature [°C] | | | -25...80 |
| Pressure rating | | 150 bar | 2175 psi | 15 MPa |
| Min. bursting pressure | | 350 bar | 5075 psi | 35 MPa |
| Type of pressure | | | relative pressure |
| Electrical data |
| Operating voltage [V] | 18...30 DC; (according to EN 50178 SELV/PELV) |
| Current consumption | [mA] | | | < 35 |
| Min. insulation resistance [MΩ] | | 100; (500 V DC) |
| Protection class | | | III |
| Reverse polarity protection | | yes |
| Power-on delay time | [s] | | < 0.3 |
| Integrated watchdog | | yes |
| Inputs / outputs |
| Number of inputs and outputs | | Number of digital outputs: 2 |
 ifmefector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — PN7093-01 — 24.06.2016 — |
| |
| PN7093 |
| Pressure sensor with display |
| PN-025-RER14-QFRKG/US/ /V |
| Outputs |
| Total number of outputs | 2 | |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | | PNP/NPN | |
| Number of digital outputs | | 2 | |
| Output function | normally open / closed; (configurable) | |
Max. voltage drop switching
output DC | [V] | | 2.5 |
Permanent current rating of
switching output DC | [mA] | | 150; (200 (...60 °C) 250 (...40 °C)) |
| Switching frequency DC | [Hz] | | < 170 |
| Short-circuit protection | | yes |
Type of short-circuit
protection | | yes (non-latching) |
| Overload protection | | yes |
| Measuring/setting range |
| Measuring range | | 0...25 bar | 0...363 psi | 0...2.5 MPa |
| Set point SP | | 0.2...25 bar | 4...362 psi | 0.02...2.5 MPa |
| Reset point rP | | 0.1...24.9 bar | 2...360 psi | 0.01...2.49 MPa |
| Insteps of | | 0.1 bar | 2 psi | 0.01 MPa |
| Accuracy / deviations |
| Switch point accuracy | < ± 0,5 | |
| | [% of the span] | | |
| Repeatability | [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) |
Characteristics deviation
[% of the span] | | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
Hysteresis deviation
[% of the span] | | < ± 0,25 |
| | | |
Long-term stability
[% of the span] | | < ± 0,05; (per 6 months) |
Temperature coefficient zero
point
[% of the span / 10 K] | | < ± 0,2; (-0...80 °C) |
| Temperature coefficient span | | | < ± 0,2; (-0...80 °C) | |
| | [% of the span / 10 K] | | | |
| Reaction times |
| Response time | [ms] | | < 3 | |
Delay time programmable dS,
dr | [s] | | 0...50 |
| Software / programming |
| Parameter setting options | hysteresis / window; normally open / closed; switching
logic; switch-on/switch-off delay; Damping; Display unit |
 ifmefector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — PN7093-01 — 24.06.2016 — |
| |
| PN7093 |
| Pressure sensor with display |
| PN-025-RER14-QFRKG/US/ /V |
| Interfaces |
| Communication interface | IO-Link | |
| Transmission type | COM2 (38,4 kBaud) | |
| IO-Link revision | 1.1 | |
| SDCI standard | IEC 61131-9 | |
| IO-Link device ID | 402 d / 00 01 92 h | |
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode | | yes |
| Required master port class | | A |
| Process data analogue | | 1 |
| Process data binary | | 2 |
| Min. process cycle time [ms] | | 2.3 |
| Operating conditions |
| Ambient temperature [°C] | -25...80 | |
Storage temperature
Protection | [°C] | | -40...100
IP 65; IP 67 |
| Tests / approvals |
| EMC | | DIN EN 61000-6-2 | |
| | DIN EN 61000-6-3 | |
| Shock resistance | | DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF [years] | | 224.01 |
| UL approval | | UL approval number | J001 |
| Pressure equipment directive | | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Mechanical data |
| Weight | [g] | | 233.5 | |
| Material | | | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) | | stainless steel (1.4404 / 316L); ceramics; FKM |
| Min. pressure cycles | | 100 million |
| Tightening torque | [Nm] | | 25...35; (recommended tightening torque;
Depends on lubrication, sealand pressure rating) |
| Process connection | | threaded connection G 1/4 Internal thread |
| Restrictor element integrated | | | no (can be retrofitted) | |
| Displays / operating elements |
| | Display unit | 3 x LED, green (bar, psi, MPa) |
| Display | Switching status | 2 x LED, yellow |
| | Measured values | alphanumeric display, red/green 4-digit |
| Remarks |
| Pack quantity | 1 pcs. | |
